I have been printing away on my Kossel Mini for some time, mostly successful with prints. However, after the spring loaded probe failed and dealing with the odd frequency of print failures, I decided to try a different probing method, using Continue reading Kossel Mini : Episode IV – A New Board
With the Z axis extended, the next axis I attempted is the Y axis – just from looking, the X axis is going to require a lot more work. The Y axis extension definitely outgrows the original frame, and I Continue reading PrintrBot Simple Adventures : Y not?
Wow, first post of 2014… 😯 Welcome to the first installment in the modification/alterations to the PrintrBot Simple. The Simple is an upgrade over the Cupcake in many ways, but it does share limitations. These limitations were something that I Continue reading PrintrBot Simple Adventures : The beginning
Here are some pictures for the cable hack necessary to get the Raspberry Pi and the LapDock to work together. The cable mod consists of a male USB microB plug, female USB microB plug, and a male USB A plug. Continue reading Lapdock + Raspberry Pi
…so, many years ago, I had purchased a PSP as a gift for a family member. I recently found the abandoned PSP(it’s a 1000 series, a first gen) and decided to put it to use. At one point, I had Continue reading recharging a PSP 1000 over USB
quick note: So, after re-reading the documentation, when facing the Cupcake(RAMPcake?) When facing the CupcakeRAMPcake, X+ = platform should move left X- = platform should move right Y+ = platform should move toward front Y- = platform should move towards Continue reading RAMPcake?
I’m currently in the process of replacing the MBI Gen3 stuff(extruder +electronics) with RAMPS+MakerGear extruder. On a quiet night, I’m calibrating the stepper motors with RAMPS when THIS occurred: I started to hear noises(although my cellphone could only Continue reading Ghost in the… cupcake?
A bought a router about a year ago, Cisco Linksys WRT310N. It’s nice, but lately, it’s been getting really hot and losing internet connection frequently. Without much preamble, I decided to take it apart to see why; I Continue reading Router fan mod