Damaged uOLED-96-G2

Ugh.  While test fitting a custom enclosure I was making, a corner piece of the glass broken from my uOLED-92-G2 display.

I broke off the lower left bit of glass, and now the display is messed upon the upper half of the display
I broke off the lower left bit of glass, and now the display is messed upon the upper half of the display

At first, I thought nothing of it – it was only the top layer glass.  However, upon powering it up, the upper half of the display is doing this weird “interlacing/skipping every other line” effect going on.

 

 

…sigh, I guess this’ll go in my toolbox until I need a half height uOLED-96-G2. 🙁

Leave a Reply